Shipping options and applicable charges shown at checkout.
Quantity
Couldn't load pickup availability
The Flats Distortion has a tight, distinctive character that oozes 1981, but it is much more than a one-trick rodent. It can go from low- to high-gain with the flick of a switch, and offers extended EQ and clipping options, building on one of the most iconic dirt pedals of the era.
Go ahead and party like it’s 1981. But bring along more gain, EQ, and clipping options.
What if a Rat and a Mudhoney had a baby, and that baby learned new gain structure options, grew a tilt style Voice control, and dabbled in its teen years with germanium clipping? That rebellious kid would be the Cleveland Music Co. Flats Distortion.
The Flats Distortion Official Demo
The Cleveland Music Co. Flats Distortion pedal is put through its paces by Brent Hamker.
Audio Clips
The Flats Distortion straight into a clean tube amp and recorded with
a standard dynamic/ribbon mic combination. Effects added in post. Each
clip starts with the clean guitar tone, followed by the sound of the
pedal.
The Flats Distortion - Scooped Clean
The Flats Distortion - Scooped High Gain
The Flats Distortion - Chug Clean
The Flats Distortion - Chug Heavy
The Flats Distortion - Hammered Clean
The Flats Distortion - Hammered Dirty
Controls & Features
VOLUME: Sets the overall output level of the pedal. Clockwise for more output; counter-clockwise for less.
FILTER: Think of it as a cut control. Clockwise to reduce treble; counter-clockwise to let more treble pass through.
GAIN: Adjusts the gain of the pedal. The gain range is greatly affected by the setting of the BOOST | VINTAGE switch.
VOICE: Alters the bass content in the gain stage, allowing more low end to pass through as it is adjusted clockwise. This thickens the tone and has the effect of changing the intensity and character of the distortion. To completely remove the VOICE control from the circuit, leave it fully counter-clockwise. This is the recommended starting point as you explore.
BOOST | VINTAGE: Toggles between the BOOST and VINTAGE gain structure settings.
BOOST is the high-gain, characteristically tight distortion we all know and love.
VINTAGE drastically reduces the gain of the pedal and produces more classic rock overdrive tones. With the Ge mode, it almost sounds low-gain muff-like.
Si | Ge: Selects between silicon and germanium clipping diodes.
Si is the so-called traditional clipping diode in this style pedal. It produces a bright and tight sound.
Ge replaces one of the silicon diodes with a germanium diode. This results in a subtle asymmetrical clipping and imparts a warmer, more round tone. It excels in the VINTAGE gain mode, but sounds great any way you use the Flats!
True-bypass switching. Top-mounted audio and DC power jacks. No battery snap provided. The pedal is industry-standard 125B in size.
Choosing a selection results in a full page refresh.
